Polaris Slingshot 2015 Скачать руководство пользователя страница 129

Страница: 129 / 136

127

AUDIO SYSTEM

Audio System Diagnostics

The audio system diagnostic menu allows the following actions for you or your Slingshot
dealer:

• View radio software version
• Set radio tuner location
• View vehicle speed

Diagnostic Menu

To access the diagnostic menu:

1. Press and hold

VOL-

to turn the radio off.

2. Turn the power switch OFF.

3. Turn the power switch ON.

4. Press and hold

PRESET

for several seconds.

5. This screen will appear if steps 1-4 were performed

correctly.

Tip:

If you do not see this screen, perform steps 1-4 again.

6. Press and release

MODE

to move to Key Pad

Diagnostics.

Key Pad Diagnostics

Audio system button diagnostics allows the user to the test the function of each audio control
button.

1. Press and release each of the audio control buttons to test the function of each button.

2. Observe the display after each button is pressed.

The screen will display the button name by its
function. If nothing displays, the button is not
working. See your authorized dealer for service.

3. Press and release

MODE

to move to Tuner

Location Settings.

Содержание Slingshot 2015









































































































































Результаты поиска

Содержание Slingshot 2015

Отзывы:

Polaris Slingshot 2015, Руководство пользователя, Страница: 129 / 136

Результаты поиска

Содержание Slingshot 2015

Отзывы: