manualshive.com logo in svg

Polaris Slingshot 2015, Руководство пользователя, Страница: 118 / 136

Поделиться
Скачать
Polaris Slingshot 2015 Скачать руководство пользователя страница 118

116

AUDIO SYSTEM

Voice Recognition Mode

Error Messages

If your phone receives an incoming call, but you do not 
have your headsets connected, the incoming call 
information and “CANNOT ANSWER” displays.

Press 

MODE

 to send the incoming call to voice mail.

If you attempt to initiate a phone call, but you do not 
have your headsets connected, “HEADSET NOT 
CONNECTED” displays.

Siri Eyes Free

Your radio’s voice command mode supports the Siri Eyes Free feature on select iPhone 
models so you can use Siri without having to look at the screen. For example:

“Play songs by...”

“Get directions to...”

“Read my notifications”

“Send a message to...”

For additional commands, consult your device’s owner’s manual.

Siri is available on iPhone 4s or later, iPad with Retina display, iPad mini and iPod touch (5th 
generation) and requires Internet access. Siri may not be available in all languages or in all 
areas, and features may vary by area. Cellular data charges may apply.

For more information about Siri Eyes Free, visit: www.apple.com/ios/siri/.

Содержание Slingshot 2015









































































































































Отзывы:

Нет отзывов