Polaris Slingshot 2015 Скачать руководство пользователя страница 107

Страница: 107 / 136

105

AUDIO SYSTEM

Selecting Audio Sources

FM/AM/MW/LW Tuning

Memory Presets

The audio system features 15 user-defined presets for each tuner source for storing favorite
stations.

1. To set a preset, press

MODE

repeatedly until the desired source is active (FM, AM, MW,

LW).

2. Use

TUNE+

TUNE-

to locate a radio station.

3. Press and hold

PRESET

4. Press

TUNE+

TUNE-

to select an available

preset location (P1, P2, P3, etc.). The preset
location displays on the screen.

Tip:

Saving a radio station without picking a location will
save the station in the next available location. The initial
position is the first unassigned preset location.

5. When the desired location is displayed, press

PRESET

. The station will be stored.

Tip:

If the desired preset location already contains a stored
radio station, it will be overwritten by the new selection.

6. Press

PRESET

repeatedly to scroll through the list

of stored radio presets.

Содержание Slingshot 2015









































































































































Результаты поиска

Содержание Slingshot 2015

Отзывы:

Polaris Slingshot 2015, Руководство пользователя, Страница: 107 / 136

Результаты поиска

Содержание Slingshot 2015

Отзывы: