manualshive.com logo in svg

Polaris RiderX PIDD, Руководство пользователя, Страница: 82 / 86

Поделиться
Скачать
Polaris RiderX PIDD Скачать руководство пользователя страница 82

81

Troubleshooting

Screen Locked “Frozen”:

1. Reset the PIDD by pressing and holding KEY 5

 

for 20

seconds.

Screen Goes Black During Update:

Typically caused by a failed update or

 

corrupted file on

 

USB flash memory drive.

IMPORTANT:

Formatting the flash drive will erase all of 

its contents.

1. Remove flash drive and re-format as FAT 32.
2. Re-download latest update files from RIDER X

website.

3.

Verify downloaded files are not in a folder

 

on the

flash drive and non-PIDD files are

 

cleared from

drive.

4.

Turn off PIDD with key switch (disconnect

battery

 

power or turn off engine if applicable)

and wait for

 

at least 10 seconds.

5. Plug USB drive into USB port.
6. Press and hold any key on keypad and then

 

turn on

PIDD.

7. Once “Booting” is no longer shown on the

 

screen,

release the key button.

8. The PIDD will go into bootloader mode. Use the PIDD

key buttons to select the update file

 

on the flash

 

drive

and install.

Содержание RiderX PIDD























































































Отзывы:

Нет отзывов