Polaris RiderX PIDD Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 86

Polaris RiderX PIDD Скачать руководство пользователя страница 72

71

Update the PIDD

1. Before updating the PIDD, always export your

existing tracks and waypoints to a USB drive to avoid
losing them. When the PIDD update is performed, all
formerly saved tracks and waypoints will be erased
from the PIDD.

2. After downloading an update from your RiderX

account and saving the extracted files to the USB
flash drive, connect the flash drive to the USB
connector on your vehicle. For vehicle USB connector
locations, see page 66.

3. Turn the ignition key to the ON/RUN position. If your

vehicle does not have a battery, start the engine and
allow the idle to stabilize before continuing. Do not
allow an engine to run in an enclosed area without
adequate ventilation.

4. Press any display key to display the PIDD screen

icons.

5. Press Key 3 to display the main menu options.
6. Toggle to System Settings. Press Key 3 to select.
7. In the System Settings menu, select SYSTEM INFO.

NOTE: Always download the most recent data from
RiderX.com before updating the PIDD.

Key 1

Key 2

Key 3

Key 4

Key 5

«
...
70
71
72
73
74
...
»

Содержание RiderX PIDD























































































Отзывы:

Нет отзывов