Polaris RiderX PIDD Скачать руководство пользователя страница 77

Страница: 77 / 86

Manual PIDD Update

Use this procedure only in the event of a failed update
using the previous procedure.
1. Delete the formerly downloaded (corrupt) files from

the USB drive. Return to RiderX.com and download
new files. See

Download the Data

on page 70.

2. Turn the ignition key off for at least 10 seconds.
3. Connect the flash drive to the USB connector on your

vehicle.

4. Press and hold any PIDD key while turning the

ignition key to the ON/RUN position. Continue to hold
the PIDD key until “Booting...” is no longer displayed.
Release the PIDD key.

5. Return to page 73 and perform steps 13-24 of the

Update the PIDD

procedure.

6. For more assistance:

• See your Polaris dealer
• Go to RiderX.com
• Go to Polaris.com (Select your product group and

click on the “Help” link at the upper right corner of
the page. When the help page displays, look for
“Helpful Links” at the right side of the page.)

Содержание RiderX PIDD























































































Результаты поиска

Содержание RiderX PIDD

Отзывы:

Polaris RiderX PIDD, Руководство пользователя, Страница: 77 / 86

Результаты поиска

Содержание RiderX PIDD

Отзывы: