Polaris RANGER EV 2015, Руководство по обслуживанию

Страница: 219 / 247

8
9926595 R01 - 2015-2016 RANGER EV Service Manual
© Copyright Polaris Industries Inc.
8.19
HEADLIGHTS
HEADLIGHT ADJUSTMENT
The RANGER headlights are adjustable.
1. Place the vehicle on a level surface with the
headlight approximately 25 ft. (7.6 m) from a wall.
2. Measure the distance from the floor to the center of
the headlight (X
1 ) and make a mark on the wall at the
same height (X
2
).
3. Apply the brakes. Turn the key on. Turn the
headlights on.
4. Observe the headlight aim. The most intense part of
the headlight beam should be aimed 8" (20 cm)
below the mark placed on the wall. Include the
weight of a rider on the seat while performing this
step.
5. Locate the T25 Torx-head adjustment screw (A)
through the wheel well (illustration) or by opening the
hood (photo). Adjust the beam to the desired position
by loosening the adjustment screw and moving the
lamp to the appropriate height.
6. Once the beam is set to the position, tighten the
adjustment screw. Repeat the procedure to adjust
the other headlight.
WARNING
Due to the nature of light utility vehicles and where they
are operated, headlight lenses become dirty. Frequent
washing is necessary to maintain lighting quality. Riding
with poor lighting can result in severe injury or death.
HEADLIGHT BULB REPLACEMENT
1. Open the hood and locate the headlight bulb.
2. Turn bulb 1/4 turn counterclockwise to remove it.
ELECTRICAL