Polaris PVCR 3300 IQ Home Aqua, Руководство по эксплуатации, Страница: 85 / 185

85
3.
At a small amount of hairs and threads wound around the bristle roller, they can me cut off by a knife
without detaching the bristle roller. For this, fit a sharp knife between bristle rows so that its cutting edge
faces outwards from the roller, and move the knife along the roller to cut off wound hairs and threads.
After that, the hair trims can easily be removed from the brush body; for convenience, the bristle roller
may be spinned by hand.
4.
If the bristle roller is heavily clogged, detach the electrical brush roller fixation frame by slightly pushing
the latches of the retainer locks, and picking up the nearer edge of the frame, then extract the frame. Fig.
20
5.
Pick up the right side of the bristle roller, pull it to the right for unhooking from the drive, and extract
from the socket. Upon having the bristle roller extracted from the brush body, it can be easily cleaned
from any wound hairs and threads by means of a sharp knife and scissors.
6.
The bristle roller installation back in its place in the brush body shall be performed in the reverse order.
7.
In case when components of the brush and the electric drive are heavily clogged, contact an authorized
service center for disassembling and cleaning.
SIDE BRUSHES CLEANING
1. Switch off the robot.
2. Check the brushes for any defects and/or presence of foreign items wound around.
3. At necessity, detach the brushes. Fig. 21
4. Wipe the brushes with a cloth soaked in hot water and well squeezed out. The cleaning shall take place
each time after vacuuming.
5. In case of damaging the side brushes, timely replace them. Fig. 22
SENSORS AND CONTACT TERMINALS CLEANING
- Clean the front wheel from any debris.
- Dedust the anti-fall sensors by a soft cloth without mechanical influence. Fig. 23
- Clean the contact pads at the vacuum cleaner bottom and on the charge base by a dry soft cloth. Fig. 24
- Disconnect the battery when the appliance is not used for long.
Works related to cleaning the outer assembly unit os the vacuum cleaner are beyond of the warranty
service.
TROUBLESHOOTING
At occurrence of any problem during operation, the robot utters respective acoustic message, and
concisely displays the main problems in the application.
Troubleshooting during operation.