Polaris M1400 Скачать руководство пользователя

Страница: 58 / 101

MAINTENANCE

Engine Oil

Oil and Filter Change

Always check and change the oil at the intervals outlined in the Periodic Maintenance Chart
beginning on page 51. Always change the oil filter whenever changing oil.

The engine drain plug is located on the bottom of the crankcase.

1. Position the vehicle on a level surface. Place the transmission in PARK. Apply the

brakes.

2. Start the engine. Allow it to idle for two to three minutes. Stop the engine.

3. Clean the area around the drain plug.

CAUTION!

Hot oil can cause burns to skin. Do not allow

hot oil to contact skin.

4. Place a drain pan beneath engine crankcase and

remove the drain plug.

5. Allow the oil to drain completely.

6. Install a new sealing washer on the drain plug.

Tip:

The sealing surfaces on drain plug and crankcase
should be clean and free of burrs, nicks or scratches.

7. Reinstall the drain plug. Torque to 11-13 ft. lbs.

(14.5-17.5 Nm).

8. Using a clean dry cloth, clean the oil filter cover

on the crankcase.

9. Place shop towels beneath the filter cover to catch

oil drips. Remove the cover screws and remove
the cover to access the oil filter.

10. Remove the oil filter and spring, retaining the

spring for reinstallation.

11. Using a clean dry cloth, clean the surface of the

crankcase.

Spring

Filter

Sealing

Washer

Drain

Plug

O-Ring

Filter Cover

Содержание M1400






































































































Результаты поиска

Содержание M1400

Отзывы:

Похожие инструкции для M1400

Бренды по названию

Популярные бренды

Polaris M1400, Руководство пользователя

Результаты поиска

Содержание M1400

Отзывы:

Похожие инструкции для M1400

Бренды по названию

Популярные бренды