manualshive.com logo in svg

Polaris M1400, Руководство пользователя

Поделиться
Скачать
Polaris M1400 Скачать руководство пользователя страница 17

15

SAFETY

Operator Safety

Handling Gasoline

Gasoline is highly flammable and explosive under certain conditions. 
• Always exercise extreme caution whenever handling gasoline.
• Always turn off the engine when refueling.
• Always refuel outdoors or in a well ventilated area free of any source of flame or sparks.
• Always use an approved gasoline container to store fuel and remove the container from the vehicle 

before filling to avoid fuel ignition due to electrical static discharge.

• Do not smoke or allow open flames or sparks in or near the area where refueling is performed or 

where gasoline is stored.

• Do not overfill the tank. Do not fill the tank neck.

• If gasoline spills on your skin or clothing, immediately wash it off with soap and water and change 

clothing.

Failure to Inspect Before Operating

Failure to inspect and verify that the vehicle is in safe operating condition before operating increases 
the risk of an accident. Always perform the pre-ride inspection before each use of your vehicle to make 
sure it's in safe operating condition. See page 30.

Always follow all inspection and maintenance procedures and schedules described in this owner's 
manual. See page 51.

Operating With a Load on the Vehicle

The weight of both cargo and passengers impacts vehicle operation. For your safety and the safety of 
others, carefully consider how your vehicle is loaded and how to safely operate the vehicle. Follow the 
instructions in this manual for loading, tire pressure, gear selection and speed.

•

Do not exceed vehicle weight capacities.

 The vehicle’s maximum weight capacity is listed in the 

specifications section of this manual and on a label on the vehicle. When more passenger weight is 
added, cargo weight may need to be reduced accordingly.

• The recommended tire pressures are listed in the specifications section of this manual and on a label 

on the vehicle.

Always follow these guidelines:

Operating a Damaged Vehicle

Operating a damaged vehicle can result in an accident. After any rollover or other accident, have a 
qualified service dealer inspect the entire machine for possible damage, including (but not limited to) 
seat belts, rollover protection devices, brakes, throttle and steering systems.

Under ANY of these conditions:

Do ALL of these steps:

Passenger and/or cargo exceeds half the maximum weight capacity

1. Slow down.

2. Verify tire pressure.
3. Use extra caution when 

operating.

Operating in rough terrain

Operating over obstacles

Climbing an incline

Towing

Содержание M1400






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды