Polaris DP-20, Руководство пользователя, Страница: 28 / 66

DP-20 WEB GUIDE CONTROLLER USER MANUAL
6
6-6
2. Press the ENTER key to enter the BASIC
Menus. The GAIN menu will be displayed.
3. Use the ARROW keys to scroll until
CALIBRATION is displayed on line 3.
4. Press the ENTER key to enter the
CALIBRATION menu. SELECT SENSOR will
be displayed on line 3.
5. If necessary, use the ARROW keys to select
the Edge of Line sensor input.
Ł
will be
displayed on line 1.
6. Press the ENTER key to begin the calibration.
UNCOVER SENSOR will be displayed on line
2. With the sensor light spot correctly focused
on the material to be guided, position the
sensor such that the light spot is located on the
background, near the line to be guided, but not
on the line (see graphic at right). The sensor
signal is displayed on Line 3.
Light Spot
Line
7. Press the ENTER key. WAIT... will be displayed
for a few seconds on line 4 of the LCD Panel.
Maintain the web position during this wait
period.
8. Once the delay has ended, COVER SENSOR
will be displayed on line 2. Position the sensor
such that the light spot is located fully on the
line to be guided (see graphic at right). The
sensor signal is displayed on Line 3 of the LCD
Panel.
Light Spot
Line
9. Press the ENTER key. If the contrast is
sufficient for guiding, SUCCESSFUL will be
displayed for a few seconds on line 2, then the
unit will automatically exit the menus and return
to the Operator Level.
—
OR
—
Ł 3E.1.1
SETUP (MAN)
GAIN
ãÜÜÜÜÜÜÜÜÜ 10.0%
Ł 3E.1.4
SETUP (MAN)
CALIBRATION
Ł 3E.1.4.1
SETUP (MAN)
SELECT SENSOR
(X4)
Ł 3E.1.4.1
SETUP (MAN)
SELECT SENSOR
(X4)
Ł 3E.1.4.3
COVER SENSOR
-ãããããããããá+ 95%
Ł 3E.1.4.2
UNCOVER SENSOR
-ÜÜÜÜÜÜÜÜÜÜ+ 0%
WAIT...
Ł 3E.1.4.4
SUCCESSFUL
-ãããããããããá+ 95%
Ł 3E.1.4.2
UNCOVER SENSOR
-ÜÜÜÜÜÜÜÜÜÜ+ 0%
3E
MANUAL
Ł -ãããããáÜÜÜÜ+
06-05-2007 DP-20 WEB GUIDE CONTROLLER Figure Sheet 1-862-D