Polaris DP-20, Руководство пользователя, Страница: 16 / 66

DP-20 WEB GUIDE CONTROLLER USER MANUAL
4
4-2
3. Press the ENTER key to allow adjustment of
the System Guide Point. The current Guide
Point value will begin flashing on line 4.
4. Use the ARROW keys to adjust the System
Guide Point to the desired position. The LCD
Panel is scaled to ±100% from the center of the
sensor bandwidth. The default range of the
Guide Point adjustment is ±80% of the sensor
bandwidth, but this range will be limited if a
Deadband above 10% is being used. ASC
settings can also limit the Guide Point range.
The Guide Point change is effective
immediately, but not yet stored.
5. If desired, press both of the ARROW keys
simultaneously to reset the System Guide Point
to the center of the available range, as
indicated on line 4.
6. Press the ENTER key to store the change or
press the MANUAL key to abort the change.
The system will exit the setup menus, and
return to the Operator Level. The Guide Point
value (GP) will be displayed on Line 4 if the
value is not 0.
×Ø 1C.2.1
SETUP (AUTO)
GUIDE POINT
-ÜÜÜåÜÜÜ+ 0.0%
×Ø 1C.2.1
SETUP (AUTO)
GUIDE POINT
-ÜÜÜÜåÜÜ+ +20.0%
×Ø 1C.2.1
SETUP (AUTO)
GUIDE POINT
-ÜÜÜåÜÜÜ+ 0.0%
1C
AUTOMATIC
×Ø -ãããããáÜÜÜÜ+
GP: +20.0%
1X.3, Measurement
1. Press the SETUP key to enter the Setup
Menus. The GAIN menu will be displayed on
the LCD Panel.
2. Use the ARROW keys to scroll until
MEASUREMENT is displayed on line 3.
×Ø 1C.1
SETUP (AUTO)
GAIN
ãÜÜÜÜÜÜÜÜÜ 10.0%
×Ø 1C.3
SETUP (AUTO)
MEASUREMENT
06-05-2007 DP-20 WEB GUIDE CONTROLLER Figure Sheet 1-862-D