Polaris 600 INDY 2016 Скачать руководство пользователя | Manualshive

Страница: 123 / 133

background image

121

WARRANTY

Warranty Coverage and Exclusions

Limitations of Warranties and Remedies

Lubricants and Fluids

1. Mixing oil brands or using non-recommended oil may cause engine damage. We
recommend the use of POLARIS engine oil.

2. Damage or failure resulting from the use of non-recommended lubricants or fluids is
not covered by this warranty.

This warranty provides no coverage for personal loss or expense, including mileage,
transportation costs, hotels, meals, shipping or handling fees, product pick-up or
delivery, replacement rentals, loss of product use, loss of profits, or loss of vacation or
personal time.

THE EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY SHALL BE, AT
POLARIS’ OPTION, REPAIR OR REPLACEMENT OF ANY DEFECTIVE
MATERIALS, COMPONENTS, OR PRODUCTS. THE REMEDIES SET FORTH IN
THIS WARRANTY ARE THE ONLY REMEDIES AVAILABLE TO ANY PERSON
FOR BREACH OF THIS WARRANTY. POLARIS SHALL HAVE NO LIABILITY
TO ANY PERSON FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES OF ANY DESCRIPTION, WHETHER ARISING OUT OF EXPRESS OR
IMPLIED WARRANTY OR ANY OTHER CONTRACT, NEGLIGENCE, OR
OTHER TORT OR OTHERWISE. THIS EXCLUSION OF CONSEQUENTAL,
INCIDENTAL AND SPECIAL DAMAGES IS INDEPENDENT FROM AND SHALL
SURVIVE ANY FINDING THAT THE EXCLUSIVE REMEDY FAILED OF ITS
ESSENTIAL PURPOSE.

THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS
EXCLUDED FROM THIS LIMITED WARRANTY. ALL OTHER IMPLIED
WARRANTIES (INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTY OF MERCHANTABILITY) ARE LIMITED IN DURATION TO THE
ABOVE 12 MONTH WARRANTY PERIOD. POLARIS DISCLAIMS ALL EXPRESS
WARRANTIES NOT STATED IN THIS WARRANTY. SOME STATES DO NOT
PERMIT THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR ALLOW LIMITATIONS ON THE DURATION
OF IMPLIED WARRANTIES, SO THE ABOVE LIMITATIONS MAY NOT APPLY
TO YOU IF INCONSISTENT WITH CONTROLLING STATE LAW.

«
...
121
122
123
124
125
...
»

Содержание 600 INDY 2016






































































































































Отзывы:

Нет отзывов

Похожие инструкции для 600 INDY 2016

Sportsman 9921796

Бренд: Polaris Страницы: 192

TRAIL BOSS 2003

Бренд: Polaris Страницы: 213

Lynx 1200 4-TEC 900 ACE 2018

Бренд: BRP Страницы: 164

Бренд: YTL Страницы: 14

1988 TRX 300 FW

Бренд: Honda Страницы: 84

1970 SKI-DADDLER

Бренд: AMF Страницы: 74

Бренд: GAS GAS Страницы: 63

Бренд: Land Pride Страницы: 50

Бренд: Access Motor Страницы: 22

Бренд: Truxta Страницы: 8

ATV ELECTRIC POWERED

Бренд: MINIMOTO Страницы: 31

MAVERICK X3 Series 2017

Бренд: Can-Am Страницы: 155

Бренд: abi Страницы: 12

Бренд: Yamaha Страницы: 18

Бренд: Toro Страницы: 32

Бренд: GSMOON Страницы: 49

Бренд: Qlink Страницы: 168

QuicKART 2000 Series

Бренд: Dane Technologies Страницы: 115

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды