Polaris 600 INDY 2016 Скачать руководство пользователя

Страница: 26 / 133

SAFETY

Safety Labels and Locations

Operation Warning

WARNING

• To avoid serious injury or death, read and understand all warnings

and the Owner's Manual before operation. If manual is missing, con-
tact a POLARIS dealer for a replacement.

• This vehicle is capable of high speeds. Buried objects or uneven

terrain can cause loss of control. Reduce speed and use extreme
caution when operating in unfamiliar terrain.

• Excessive speed, especially at night or with limited visibility, can

result in insufficient time for you to react to terrain changes, to
avoid unexpected obstacles, or to stop safely.

• Never consume alcohol or drugs before or while operating this vehi-

cle.

• In an emergency, push down the Auxiliary Shut-Off Switch, located

on the top of the throttle control assembly, to stop the engine. Then
pull the brake lever to stop.

• Always wear an approved helmet, eye protection, and adequate

clothing while operating this vehicle.

• This vehicle is designed for adult use only. Check local laws for age

requirements.

(continued on next page)

Operation Warning

Содержание 600 INDY 2016






































































































































Результаты поиска

Содержание 600 INDY 2016

Отзывы:

Похожие инструкции для 600 INDY 2016

Бренды по названию

Популярные бренды

Polaris 600 INDY 2016, Руководство пользователя

Результаты поиска

Содержание 600 INDY 2016

Отзывы:

Похожие инструкции для 600 INDY 2016

Бренды по названию

Популярные бренды