Polaris 550 Indy 2022, Руководство пользователя

Страница: 90 / 162

TAILLIGHT/BRAKE LIGHT REPLACEMENT
The taillight assembly is not serviceable. If the light fails to operate properly,
replace the entire taillight assembly.
CLUTCH SYSTEM
Periodically inspect clutch sheaves for damage, wear or belt residue. To
maintain optimum performance, clean with non-oil based cleaners such as
isopropyl alcohol.
WARNING
If you become aware of higher than normal clutch engagement or an unusual
vibration or shift pattern, see your dealer or qualified person immediately. Do
not operate the snowmobile until repairs have been made.
All clutch maintenance and repairs can be performed by an authorized
POLARIS dealer. Any unauthorized modifications to clutches, such as adding or
removing weights, will void the warranty.
NOTICE
The slider blocks and bushings of the 550 clutches are made of a material that
may be damaged if lubricated. Do not lubricate bushings or slider blocks.
TORQUE STOP
Periodically check torque stop
q
clearance. With clutches in proper
alignment, the torque stop clearance
should be .010-.030 inch (.25-.75 mm)
from the engine case.
Adjust if necessary, and lock the jam
nut.
DRIVE BELT CONDITION
Periodically check the condition and tension of the drive belt. Inspect the belt for
signs of excessive wear: frayed edges, missing cogs, cracks and excessive
looseness. Replace the belt if any of these conditions exist.
Always carry a spare drive belt. Store the spare belt in the belt clip located under
the left side of the hood.
88
MAINTENANCE
Downloaded from ManualsNet.com search engine