Instr 9929140
Rev 01 2018-08
Page 3 of 17
INSTALLATION INSTRUCTIONS
CAUTION
BEFORE STARTING INSTALLATION
, always
ensure vehicle is properly secured on a flat stable
surface to avoid accidental tipping, unwanted
movement and to prevent personal injury and/or
damage to equipment. Shift vehicle transmission into
“PARK”. Turn key to “OFF” position and remove from
vehicle.
1.
DISCONNECT BATTERY.
WARNING
ALWAYS
disconnect black negative (-) cable from
battery
FIRST
. Failure to do so will result in a high
current electrical arc, and may result in battery
explosion, if tool touches grounded frame. Death or
serious personal injury may occur.
a. Lift the driver side seat latch
A
located behind
seat bottom and remove the driver seat
B
. Set
seat aside for later reinstallation.
b. Remove battery access panel
C
to access the
battery terminals.
c. Disconnect black negative (-) cable from
battery
FIRST
.
d. Next, disconnect red positive (+) cable from
battery.
2.
REMOVE HOOD.
a. Rotate the two hood latches to release the
hood. Pull the hood forward and up to remove
from vehicle.
3.
REMOVE WINCH COVER.
a. Remove lower front winch cover
A
by
removing four push rivets
B
.
