Instr 9928802
Rev 01 2018-06
Page 4 of 8
4.
REMOVE CONSOLE.
a. Remove two dart clips
A
on right side along
with clutch tool
B
and dart clip
C
from left side
and slide the console rearward leaving the
starter rope attached.
The console should now be in a position to
allow you to access the fabric electrical
connections bag in the following steps.
5.
SELECT HARNESS.
a. For
850 models
use harness
q
. See detailed
image.
• Connector (1a) will get connected to the
chassis harness.
• Connector (1b) is a spare connector for use
with additional accessories.
• Connectors (1c) connect to the USB
terminals on the bag.
b. For
Titan
™
™
models
use harness
w
. See
detailed image.
• Connector (2a) will get connected to the chassis
harness.
• Connector (2b) is a spare connector for use with
additional accessories.
• Connectors (2c) connect to the USB terminals on
the bag.
