![Polaris 2882243 Скачать руководство пользователя страница 5](http://html.mh-extra.com/html/polaris/2882243/2882243_manual_1571797005.webp)
Instr 9927476
Rev 01 2016-11
Page 5 of 12
WINCH INSTALLATION
NOTE
See the Electric Connections Reference Guide on
the last page of the instruction manual for detailed
photos of each part and their respective connections.
1. Install winch mounting bracket with pre-assembled
winch
w
and Autostop Fairlead to the chassis
frame using four screws
1(
as shown. Torque
screws to specification.
TORQUE
20 ft. lbs (27.1 Nm)
CONTACTOR INSTALLATION
1. Connect red cable
a
and black cable
o
to the
corresponding colored posts on contactor.
Similarly, connect yellow cable
u
and blue
cable
i
to the colored posts on contactor as
shown.
2. Place the contactor
s
along with cables installed
on the bracket as shown. Contactor mounting
bracket holes are not threaded. You will need to
thread the holes by running the self-tapping
screws
j
in from the top as shown.
3. Connect short red
a
and black
o
cables to the
vehicle bus bar on same posts as the battery red
and black cables are connected.
4. Feed the yellow
u
and blue
i
cables down the
right side of the vehicle near the frame tube to the
winch as shown. Hook the cables to the
corresponding colored posts on winch. Slide the
black rubber boots on yellow and blue cables.