7515243-418E
A-7515243
FRONT BRUSHGUARD
KIT PN 2878839
- 3-
Imprimé en Chine / Printed in China
4. Remove the plastic caps onto the ends of the existing front bumper. Insert the taper block
f
into the existing
bumpers's tube and fasten using
(2) M8-1.25 X 20 mm
flange bolts
g
and
(2) M8-1.25
flange nylock nuts
i
(finger
tighten at this time). Repeat
steps 3
and
4
for the opposite side.
5. Secure firmly the flange bolts
g
retaining the left
d
and right
e
supports onto the existing front
bumper. Thereafter, firmly tighten the flange bolts
g
retaining the middle section
onto the left
d
and right
e
supports.
6. Make sure that the end of the left section
is held
firmly against the existing front bumper. Lock in
position by tightening the Allen socket machine
screw
h
installed in
step 3
. Secure firmly the
flange bolts
g
retaining the left section
onto the
middle section
. Repeat
step 6
for the opposite
side.
OPTIONAL HEADLIGHTS
Mounting holes are on top of the middle section
has to allow the installation of the Polaris optional headlights.
LEFT FRONT VIEW
LEFT FRONT VIEW
Front of
the Vehicle
LEFT FRONT VIEW
Содержание 2878839
Страница 4: ......
