Polaris 2013 RANGER RZR, Руководство по обслуживанию

Страница: 229 / 430

5.65
BODY / STEERING / SUSPENSION
5
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
27. Use a small pick to remove the bearing assembly and
body cap seals. Discard these parts (Fig. 12).
NOTE: If the bearing assembly inner bearing
(bushing) requires service, replace the bearing
assembly.
28. Inspect the piston valve and compression/rebound
valve shims. Remember to keep the valve shims in
their specified order. Replace the piston valve and/or
valve shims if required.
29. Clean all parts with solvent and use compress air to
dry. Place clean parts on a lint-free towel/shop rag.
FOX™ 2.0 PODIUM Top Fill Reassembly
NOTE: Lubricate all seals, o-rings, and wear bands
with low temperature grease during assembly
procedure.
1. If the shock shaft eyelet was removed for service,
clamp the shock shaft using the 5/8” shaft blocks in a
bench vise.
2. Apply Loctite
™
Primer N to the shaft threads. Allow
for proper curing time before apply Loctite
™
Green
638 to threads.
3. Install the eyelet and torque to specification.
4. Mount the shock shaft eyelet in a bench vise with the
threaded end upwards.
5. Install the bumper; narrow end upwards.
6. Install a new wiper seal in the body cap (Fig. 13).
Figure 12
= T
Podium 2.0 Shock Shaft Eyelet:
50 ft-lbs (68 Nm)
g
Figure 13
PRELIMINARY
VERSION