Polargos Simple Move 101, Руководство пользователя

Страница: 15 / 36

15
EN
► Connection to power supply
For safety reasons, only carry out these activities with the power supply
disconnected.
[1]. Skin the wires of the supply conductor (the
same length for 3 wires).
[2]. Connect the earth conductor.
The earth conductor (green-yellow) and the
insulated terminal provided (13) will be needed
in case of some accessories (lighting 230 V,
Class I).
[3]. Connect the phase conductor P and the
neutral conductor to terminals 15 and 16 of the
electronic module (red label 230 V).
Check whether the conductors are blocked
correctly by pulling them slightly.
Terminal
Blue conductor N
15
Red/brown/black
conductor
P 16
Green-yellow conductor
It is obligatory to observe the recommendations concerning the colours
of conductors.
► Connection to a solar energy source
(See page 30)
► Connection of protecting accessories
Photocells (to be sold separately as an option in the set Simple Move 101)
(See pages 23 and 24)
The photocells must be fixed and connected before the start-up of the drive unit.
The orange light (to be sold separately as an option in the set Simple Move 101)
(See pages 26 and 27)
15
16
230V
N
P
8 mm
75 mm