7
SETTING UP YOUR OH1
We recommend that you charge the battery before you start using your OH1. If the battery is completely
empty, it may take a moment for the charging to start. See
for detailed information on charging
the battery.
Note that when your OH1 battery has enough power it will advertise itself to all compatible receivers
nearby.
Choose one option for setup
A. Wired computer setup is quicker and you can charge your OH1 at the same time, but you need a
computer available. This method requires an internet connection.
B&C. Mobile setup is convenient if you don't have access to a computer with a USB port, but it might take
longer. This method requires an internet connection.
Fill in all the physical details required for accurate training data at once, and get the latest firmware for
your OH1.
OPTION A: SET UP WITH YOUR COMPUTER VIA FLOWSYNC
1. Place the sensor into the USB adapter
with the lens facing up so that the
contacts on the sensor and the USB
adapter meet (picture 1).
2. Plug the USB adapter into your
computer USB port (picture 2), and go
to
and install
Polar FlowSync data transfer software
to your computer.
3. Sign in with your Polar account or
create a new one. We’ll walk you
through the sign-up and setup within
the web service.
After the setup is done, you’re ready to
go. Have fun!
OPTION B: MOBILE SETUP WITH POLAR FLOW APP WHEN YOU HAVE A POLAR
WRIST UNIT
Polar OH1 connects to the Polar Flow mobile app wirelessly via Bluetooth and ANT+, so remember to have
Bluetooth turned on in your mobile device.
Содержание Polar OH1
Страница 1: ...USER MANUAL...
