• Ice Cube Production & Cycle Times:
Small 7:00min per cycle (Full Basket Cycle 1hr. 45min 90 cubes)
Medium 9:00min per cycle (Full Basket Cycle 2hrs. 00min 99 cubes)
Large 10:00min per cycle (Full Basket Cycle 2hrs 10min 99 cubes)
setting-up Your Ice Maker
1. Remove the exterior and interior packaging materials. Check the ice basket, ice
basket baffle and ice cube scoop are included with the unit.
If any parts are missing,
please contact our customer service department. 1-866-253-0447 or support@
greenwayhp.com
2. Select a location for your ice maker that is protected from direct sunlight and other
sources of heat (i.e. stove, furnace, radiator). Place the ice maker on a solid level
surface. A minimum clearance of 2” is required between the back and sides of
your ice maker and any adjacent walls.
3. Allow one hour for refrigerant (cooling) fluids to settle before connecting
(operating) your ice maker.
4. The appliance must be positioned for easy access to an electrical outlet.
5. This appliance requires a standard 120volt, 60Hz three-prong
(grounded) electrical
outlet.
6. This ice maker is not designed for “direct plumbing” installation and must be
manually filled.
Cleaning and Maintenance
Before using your ice maker it is strongly recommended to clean it thoroughly.
1. The exterior cabinet of the ice maker should be cleaned using a mild detergent
solution and warm water.
2. Remove the ice basket and baffle, wash and rinse with lukewarm water only. (Not
dishwasher safe) Thoroughly clean and rinse the interior of the cabinet with
lukewarm water and a soft cloth.
3. Drain out any remaining water by positioning the unit next to a sink, remove the
drain cap and plug located on the left side of the cabinet. Replace the drain cap and
plug when the unit is empty.
6
