Page 49 of 65
PG2021 CHV2-VP-ECM-V2
3.3)
Wire connection check
3.3.1) After the wire connection is completed, please check that the wire colour correspond.
3.3.2) Check the wire contact by using a multimeter.
3.3.3) Check 1 and 2, 3 and 4, 5 and 6 to be sure connections are correct.
3.3.4) If the resistance between two wire contacts is too high, please check and reconnect the wire contacts.
4)
Reconnect the communication plug to control box
5)
Use wired wall pad or Modbus to set each unit address.
1
st
contact
2
nd
contact
3
rd
contact
4
th
contact
5
th
contact
6
th
contact
Cooke Industries - Phone: +64 9 579 2185 Email: [email protected] Web: www.cookeindustries.co.nz
