Point Six OneSix, Руководство пользователя, Страница: 47 / 58

OneSix Server Help OneSix Server OPC Tags x 43
DeviceCount.OUTPUTDESC – number of Dual Discrete Outputs
DeviceCount.OUTPUTANALOG – number of Wireless Analog Outputs
Logging.Rate
(R/W)
-
indicates the rate of logging in seconds. 0 - no
logging. Less than 1 is accepted. Less than 5, OneSix ™ leaves the file
open until terminated or set to 0. When 5 or greater, OneSix ™ opens,
then logs, and then closes the file at every logging interval. When -1,
OneSix ™ logs once immediately; OneSix ™ sets to 0 when completed.
Logging.LogFile (R) - full pathname of the log file.
Desc (R) - extra server tag clients can read/write for any purpose.
Ready (R) - 0 OneSix ™ is initializing; 1 OneSix ™ is ready and polling.
Version (R) - version number of OneSix ™ .
SearchAdd (R/W) - Client must write any number to start SearchAdd
function. When completed OneSix ™ Server will set back to zero.
Quit (R/W) - When Client sets value greater than 0, OneSix ™ Server
terminates and unloads.
Restart
(R/W) - Client must set as follows.
1 to 999 OneSix ™ Server deletes the OneSixOPC.ini file device
information, removes all device objects from memory, performs a
SearchAdd function, creates a new device list, and rewrites this
information to the
OneSixOPC.ini
file.
1000+ OneSix ™ Server deletes the OneSixOPC.ini file device information
and then restarts the program.
<0 OneSix ™ Server restarts the program.
After successfully completing these operations, the
restart
tag is set back to
zero.
* All error counters have the following format 0.000 where 0.001 is added to the
count for any device error that causes a retry and a 1.000 is added to the
counter if the error causes the device to go offline.
(R) – indicates that the tag is readable.
(R/W) – indicates that the tag is both readable and writeable. OPC Write operations
will either change an I/O point at the device, or an operation will be performed.
Description of NetErrors.LastNo and NetErrors.Last
-44 Communication Error: CRC16 or Time Out
-46 Cannot Find Receiver.
-48 No Devices Attached.
-39 OneSix™ Server Internal Error.
-33 Invalid calibration entered.
-25 Communication error with Receiver.