8
x
OneSix Main Window
OneSix Server Help
Add/Delete IP Connection
(TCP/IP Receiver only)
OneSix will display the “Add/Delete IP Connection” screen. IP addresses already
setup will be displayed. The following is a list of the columns:
Node
– Node number for the IP address. OneSix uses this number to
identify this IP connection. OneSix uses this number to update the OPC
tag item “nodaladdress”.
IP Address
– the IP address that is used to address the receiver.
Port
– the port number that is used along with the IP address to address the
receiver.
Conn
– identifies who initiated the connection. Outgoing: OneSix initiated
the connection with the receiver. Incoming: the receiver initiated the
connection with OneSix.
Password
– initial password used to gain access to the receiver.
Description
– a general description field associated with the IP connection.
The following is list of buttons in the “Add/Delete IP Connection” screen:
Test
– OneSix will try to make a connection to this IP address and report
back success or failure.
Add New
– OneSix displays the “New IP Address” screen. The following
is list of the fields to enter to add a new IP connection:
IP Address
– the IP address that is used to address the receiver
Port
– the port number that is used along with the IP address to address
the receiver.
Description
– a general description field associated with the IP
connection.
Password
– initial password used to gain access to the receiver. If the
receiver does not have a password set or does not require a
password then leave this field blank.
Connection
– identifies whether OneSix will initiate the connection or
whether the receiver will initiate the connection. Outgoing: OneSix
initiates the connection. Incoming: OneSix waits for the receiver to
initiate the connection.
Edit
– OneSix displays the “Edit” screen showing the selected IP
connection. The “Edit” screen has the same fields as the “New IP
Address” screen.
Delete
– delete the selected IP connection.
View IP Connection Status
(TCP/IP Receiver only)
OneSix will display the “IP Status” screen. OneSix shows the current state of the all
the connections. The following describes the columns: