Aug/07
MN2036400001
16
7.
Click
Yes
to restart to complete the installation.
For Windows® XP-x64/Server 2003-x64
For New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the “
PCI_IO\SiI3132\Driver\64-bit Windows\RAID” folder, found
on the driver CD, onto a blank floppy disk then follow the directions
below.
1.
Setup the RAID Array prior to Windows installation.
2.
Follow Microsoft’s Windows installation procedure.
3.
Restart the computer when prompted by Windows’ installation.
4.
At the Windows Setup screen, press
F6
to install the RAID driver.
5.
When prompted, press
S
to specify the location of the driver.
6.
Insert the floppy disk, then press
Enter
.
7.
Select
Silicon Image SiI 3132 SoftRAID 5 Controller (64-bit
Extended)
, then press
Enter
.
8.
Press
Enter
to finish driver installation, then follow the on-screen
instructions to complete the Windows installation.
Note:
If the
Security Alert
warning pops up, click
Yes
. Our driver has
passed Microsoft compatibility test, this message appears during new
