Aug/07
MN2036400000
10
3.
At the next screen select
Mirrored
then press
Enter
.
4.
Select
Manual configuration
, then press
Enter
.
5.
Select the
Source
drive, press
Enter
.
6.
Select the
Target
drive, press
Enter
.
7.
Enable
Disk Copy
, select
Yes
, then press
Enter
.
Note:
Enable Disk Copy –
Copy current content of source driver to
mirror drive; Disable Disk Copy – RAID 1 set formed must be
repartitioned and reformatted to guarantee the consistency in their
contents.
8.
Press
Ctrl+E
to exit the BIOS.
9.
When asked
Are you sure to exit(Y/N)?
, press
Y
to exit and
reboot.
Note:
If during boot the RAID BIOS reports an
RAID1 set is in
Rebuild status, The rebuild will continue after boot sequence is
complete
, disregard the message, continue booting, and let the Mirror
rebuild.
