Aug/07
MN2036400000
17
3.
Restart the computer when prompted by Windows’ installation.
4.
At the Windows Setup screen, press
F6
to install the RAID driver.
5.
When prompted, press
S
to specify the location of the driver.
6.
Inset the floppy disk, then press
Enter
.
7.
Select
Silicon Image SiI 3x12 SATARaid Controller (64-bit
Extended)
or
Silicon Image SiI 3x12 SATARaid Controller
(Itanium)
, then press
Enter
.
8.
Press
Enter
to finish driver installation, then follow the on-screen
instructions to complete the Windows installation.
Note:
If the
Security Alert
warning pops up, click
Yes
. Our driver has
passed Microsoft compatibility testing, this message appears during
new installation.
For An Existing Installation
1.
Setup the RAID Array prior to driver installation and boot up to
Windows.
2.
At the
Found New Hardware Wizard,
select
No, not this time
,
then click
Next
.
3.
Insert the driver CD, select
Install the software automatically
(Recommended)
, and click
Next
.
4.
Click
Finish
.