PNI TCM2.5 Скачать руководство пользователя страница 3

Страница: 3 / 48

Page 3 of 48

About the TCM2.5/2.6

Thank you for purchasing the TCM2.5/2.6. The TCM2.5 has been designed as a drop-in replacement for

PNI Corporation’s TCM2 family of products. The TCM2.5 uses the same board size, interface connector,

and RS-232 protocol as the TCM2 modules to allow for ease of integration with existing systems.

The

TCM2.6 has all the features of the TCM2.5, but is about half the size and weight and has an extended

temperature range.

The TCM2.5/2.6 are the choice for existing applications that require compatibility with PNI Corporation’s

TCM2 family of products.
The TCM2.5/2.6 integrates 3-axis magnetic field sensing, 2-axis tilt sensing, and compass heading into a

single module. Advantages include compatibility with existing systems, low power consumption, large

signal noise immunity under all conditions, and a large magnetic field measurement range.

The TCM2.5/2.6 combines PNI Corporation’s patented Magneto-Inductive (MI) sensors and measurement

circuit technology with a MEMS accelerometer for unparalleled cost effectiveness and performance. The

MI sensor changes inductance by 100% over its field measurement range. This variable inductance

property is used in a cost and space efficient ASIC (PNI 11096) which incorporates a temperature and

noise stabilized oscillator/counter circuit which is inherently free from offset drift.

The TCM2.5/2.6’s advantages make it suitable for many applications, including:

•

Remote terrestrial antenna direction indicators

•

Side-scan sonar

•

ROV, AUV control

•

Survey equipment

•

Robotics systems

•

Vehicle detection

With its many potential applications, the TCM2.5/2.6 provides a command set designed with flexibility and

adaptability in mind. Many parameters are user-programmable, including reporting units, a wide range of

sampling configurations, output damping, and more. We hope the TCM2.5/2.6 will help you to achieve the

greatest performance from your target system. Thank you for selecting the TCM2.5/2.6.

Содержание TCM2.5

















































Результаты поиска

Содержание TCM2.5

Отзывы:

Бренды по названию

Популярные бренды

PNI TCM2.5, Руководство пользователя

Результаты поиска

Содержание TCM2.5

Отзывы:

Бренды по названию

Популярные бренды