9
Clearing A Jam
1.
In the event of a jam, the Gate (Ref. No. 22 Pg. 17) can be opened by pulling the gate
clip upward. (See Figures 7 and 8) (The Shoe does not have to be removed to open
and close the Gate.)
2. IMMEDIATELY
DISCONNECT
from power source until jam is cleared!
3.
Once Gate is open, clear jam.
4.
Inspect to be sure no damage has been done to the Driver Blade, Guide, Gate,
Magazine or Pusher Finger. (If damage has occurred, repair immediately before
connecting to the power source and continuing.)
5.
Close Gate by placing the Gate Clip Wire over the two hooks of the Guide as shown
and press down to seat and lock the Gate in place. Make sure the Gate is properly
reseated.
6.
DO NOT OPERATE WITH GATE OPEN!
Figure 7
Pull the tab of Gate Clip to open Gate. Opening
the Gate allows access to the Nail Chamber.
Figure 8
To Close Gate, reset the Gate tab ends under the ears of
the Guide. Reset the Gate Clip Wire over the two hooks
of the Guide and pivot Gate Clip down until seated.
Ensure Gate is secure before continuing operation.
