Pneusej Venga 400, Руководство по эксплуатации

Страница: 48 / 62

- driving motor is off
- key is not in ignition
- electronic control is off
Unwanted machine’s start can lead to accidents and injuries.
Use only original spare parts. Using non-original spare parts can result not only
in machine failure but also in serious injuries due to poor quality of these
components.
Before welding on machine or tractor disconnect all electronic devices from
power. Otherwise there is a risk of damage of electronic and fire.
Do not use pneumatic grease press to lubricate the bearings. High pressure
from this press can damage bearings.
Safety in using oils and lubricants
Additives in oils and lubricants can have negative effect on health. Please note the following:
Beware of contact lubricant and skin. It can cause skin injury.
When using lubricants, protect skin using gloves that are resistant to oils or
barrier cream.
Never use oil and lubricants with naked hand. Fragments from these oils
increase risk of injury.
Change dirty clothes from oil more often.
Liquidate used oils in accordance with legal regulations.
Principals
Instructions in this manual refer to maintenance work. When doing this work, machine’s
parts have to be in working position and secured.
Lubrication with manual lubrication press do with one or two press’s strokes. Excessive
lubrication forces the bearings from each other. Dust and dirt can penetrate the bearings.
This can result in a reduction of bearing life.