Pneusej Venga 400, Руководство по эксплуатации

Страница: 24 / 62

Electronic control
You can find all information about electronic control in special operating manuals.
Preparation for seeding
In this chapter, you will find general information about using seeding machine, about
seeding preparation and setting the seeding machine.
Dosing unit
It is possible to set:
- Setting value.
- Microdosing (ON or OFF).
- Switch (for normal or fine seed).
For setting the right value, make sure, if it is normal or fine seed.
- Normal seed
➢
seed size: 4-10 mm
➢
for example: wheat, barley maize, peas, oats, beans, triticale, rye,
soybean.
- Fine seed
➢
seed size: 1,5-4 mm
➢
for example: grass, rape, clover, phacelia
Seeding chart
In next chart, you will find values for normal and fine seed. Values in the table are indicative
because specific weight and size of seeds may be different. Set the correct value by
calibrating. When sowing a small amount of seed, use microdosing system.
→
Preparation for seeding – Dosing unit – Microdosing