Pneusej Venga 400 Скачать руководство пользователя страница 12

Страница: 12 / 62

When using other than original spare parts, the warranty and liability of the manufacturer

for the product is void.

For all maintenance work:

- switch off the tractor PTO,

- depressurize the hydraulic system,

- if it is possible, disconnect tractor,

- keep the machine in safe location,

- do not step on the machine, use safe steps,

- secure the machine against movement,

- do not touch the running V-belt in any way.

Interruption of electric current

Before working on an electronic device, it is necessary to disconnect from the power supply.

Work on a device under the current can cause injury and damage to the machine.

Changing hydraulic hoses

It is necessary to change hydraulic hoses every three years because they are aging without

visible external damage. Damaged hoses can lead to severe or fatal injuries.

Cleaning with high-pressure cleaner

The machine can be cleaned with water or steam. Clean bearings, fans, signal distributors,

plastic parts and hydraulic hoses only with little pressure to avoid damage.

Remove the accumulator and alternator before welding

Before electric welding, remove accumulator and alternator. This prevents the possibility of

damage to the electronic device.

Tighten screw connection

After the care and maintenance work tight the loosened screws again. Unattached screw

connections can cause injuries and material damage.

Other regulations

Compliance

Beside these safety instructions, also follow:

- safety regulations,

Содержание Venga 400































































Результаты поиска

Содержание Venga 400

Отзывы:

Бренды по названию

Популярные бренды

Pneusej Venga 400, Руководство по эксплуатации

Результаты поиска

Содержание Venga 400

Отзывы:

Бренды по названию

Популярные бренды