A
B
C
For additional information about this or other PMI products, contact us.
Pigeon Mountain Industries, Inc.
PO Box 803
LaFayette, GA 30728
Toll Free:
888.764.1437
Phone:
706.764.1437
Fax:
800.952.3747 or 706.764.1531
Email:
Web:
www.pmirope.com
Equipment Inspection Log
Item:
Model #
Size:
Date
Use or Maintenance
Comments
Name
INSTRUCTIONS
Fitting and use:
Place the helmet on your head and turn the knob to adjust the head
band. The fi t should be snug, but not tight. Snap the chin strap under
your chin using the quick disconnect buckle. Adjust the chin strap
by sliding the webbing through the ladder lock side of the quick
disconnect buckle. Excess length of the chin strap can be kept out of
the way with the Velcro fastener. Adjust the nape strap by sliding the
rear webbing though the ladder lock buckle. Always keep the chin
strap fastened while wearing this helmet.
Removal:
To remove the helmet, squeeze both sides of the quick release buckle.
The female side of the buckle should automatically eject from the
buckle.
Strap Retainers:
Use the small bungees at the front and rear of your Ventilator Helmet
to attach a headlamp or the strap of your goggles if desired.
Other Features:
The Ventilator features a built in goggle mount designed for use with
ESS goggles (Product# HL33021 & HL33023), and an optional mount
for ear protection.
Three Point Suspension:
Three points of suspension means that
in addition to the support points on
both sides of the helmet (A/B), a third
point of support is positioned at the
rear (C). The additional point helps to
prevent the helmet from falling forward
over the user’s eyes.
COLORS
Red
HL33068
White
HL33069
SIZING
The PMI Ventilator Helmet is designed to fi t head circumference from
50 to 64cm (20 to 25in).
ADDITIONAL INFORMATION
CAUTION
Always keep the chin strap fastened while this helmet is being worn. An
unfastened chin strap will greatly reduce the ability of this helmet to protect
your head.
WARNING
• YOU COULD BE KILLED OR SERIOUSLY INJURED IF YOU DO NOT READ
AND UNDERSTAND THIS BOOKLET BEFORE USING PRODUCT.
• SPECIAL TRAINING AND KNOWLEDGE ARE REQUIRED TO USE THIS
PRODUCT.
• YOU MUST THOROUGHLY READ AND UNDERSTAND ALL
MANUFACTURERS INSTRUCTIONS BEFORE USE.
• USE AND INSPECT THIS PRODUCT ONLY IN ACCORDANCE WITH THE
MANUFACTURERS INSTRUCTIONS.
• YOU CAN CONTACT THE MANUFACTURER AT 706-764-1437 FOR
IMPORTANT SAFETY INFORMATION.
