Thank you for choosing the PMC
twotwo remote control
. This guide provides installation and
operating instructions.
The
twotwo remote control
can be used with any combination of
twotwo
series loudspeakers
and sub-woofers, allowing operational control and full configuration of all connected devices.
Connections
The
twotwo remote control
is connected to the RJ45 In socket on the first twotwo
series in the
control chain using the supplied RJ45 cable. The RJ45 Thru socket of the first loudspeaker in the
chain is then connected to the RJ45 In socket of the subsequent speaker using another RJ45
cable. Additional speakers are daisy chained it the same manner.
The supplied loop-back terminator must
be plugged into the RJ45 Thru port of the last
loudspeaker in the control chain.
Loudspeakers can be connected in any order, but digital audio is passed only from one
speaker to the following speaker in the chain. For example, if you connect a stereo digital
input to the front left speaker, it makes sense to connect the front right speaker as the following
device in the control chain, since it can then access the right audio channel directly via its RJ45
connection.
Introduction
!
