Plymovent SDCA, Инструкция по установке и эксплуатации

Страница: 4 / 8

0000118225/171018/A SDCA EN - 3
PREFACE
Using this manual
Pictograms and symbols
The following pictograms and symbols are used in this manual:
TIP
Suggestions and recommendations to simplify
carrying out tasks and actions
ATTENTION
A remark with additional information for the user. A
remark brings possible problems to the user’s
attention.
CAUTION!
Procedures, if not carried out with the necessary
caution, could damage the product, the workshop or
the environment.
Personal protective equipment (PPE)
Instruction to use respiratory protection when you
do service, maintenance and repair jobs, as well as
during functional testing. We recommend to use a
half-face respirator according to DIN EN 141/143,
protection class P3.
Personal protective equipment (PPE)
Instruction to use protective gloves when you do
service, maintenance and repair jobs.
Text indicators
Listings indicated by “-” (hyphen) concern enumerations.
Listings indicated by “•” (bullet point) describe steps to
perform.
Service and technical support
For information about specific adjustments, maintenance or
repair jobs which are not dealt with in this manual, please
contact the supplier of the product. He will always be willing to
help you. Make sure you have the following specifications at
hand:
- product name
Product indications
Unless specifically stated, the contents of this manual applies
to the SDCA.
1 INTRODUCTION
1.1 General description
The safety disconnect coupling adjustable (SDCA) is used to
operate the vehicle exhaust removal system. The SDCA
connects the lower hose to the upper hose assembly. In the
unlikely event the nozzle remains engaged as the vehicle exits
the facility, the unit disconnects from the assembly to prevent
damage to the system. Recommended for VEX applications.
1.2 Technical specifications
SDCA-150
Article number 0000105059
Material
• hose connection
• sleeve
• cover
• aluminum
• nylon
• EPDM rubber
Max. release force 90 kg (206 lbs)
Refer to the available product data sheet for
detailed product specifications.
2 PRODUCT DESCRIPTION
2.1 Product components
The product consists of the following main components and
elements:
A Hose connection straight (mounted as upper part)
B Spring-loaded sleeve with cover
C Hose connection angled (mounted as lower part)
Fig. 2.1 Product components
A
B
C