Plymovent SDCA, Инструкция по установке и эксплуатации

Страница: 6 / 8

0000118225/171018/A SDCA EN - 5
Fig. 4.2b Positioning the hose connections in the sleeve
5 USE
The SDCA connects the lower hose to the upper hose
assembly. In the unlikely event the nozzle remains engaged as
the vehicle exits the facility, the unit disconnects from the
assembly to prevent damage to the system.
CAUTION!
Do not hang or swing on the hose as you will
damage the exhaust removal system.
CAUTION!
Do not drive out of the service bay with the nozzle
still connected to the vehicle.
CAUTION!
In case of using the SDCA in combination with a
hose reel, make sure the hose reel is installed
correctly. When in doubt, please contact Plymovent.
For more information please consult the hose reel
manual.
6 TROUBLESHOOTING
Problem Possible cause Solution
The SDCA releases
too quick
Spring tension too
low
Increase spring
tension by turning
the adjustment
screws clockwise.
Refer to fig. 4.2a.
The SDCA does
not release
Spring tension too
high
Increase spring
tension by turning
the adjustment
screws counter
clockwise. Refer to
fig. 4.2a.
7 DISPOSAL
After life of the product, dispose it of in accordance with
federal, state or local regulations.
8 SPARE PARTS
There are currently no spare parts available for this product.
CE DECLARATION
We, Plymovent, Koraalstraat 9, 1812 RK Alkmaar, the
Netherlands, herewith declare, on our own responsibility, that
the product(s):
- SDCA
which this declaration refers to, is/are in accordance with the
conditions of the following Directive:
and is/are in conformity with the following harmonized
standard(s) and/or other such normative doc
amendments, if any:
Alkmaar, the Netherlands, October 17
th
, 2018
Kees Janssen
Product Manager EE
A
B