MultiSmart
®
Arm/ENG/USA/CAN/2/16
BSAB no: T0.31
Ser.no: MSA/TB
Date: Aug-98
Replace:
MultiSmart
®
Arm
Technical data
TECHNICAL DESCRIPTION
Max.
working
radius*
m, ft
Hose
diameter
mm, in
Rec.
airflow m
3
/h, CFM
3, 10'
3, 10'
3, 10'
4, 14'
4, 14'
4, 14'
3, 10'
3, 10'
4, 14'
4, 14'
125, 5"
160, 6"
200, 8"
125, 5"
160, 6"
200, 8"
125, 5"
160, 6"
125, 5"
160, 6"
400 - 700, 240 - 410
800 - 1400, 470 - 820
1300 - 2000, 770 - 1180
400 - 700, 240 - 410
800 - 1400, 470 - 820
1300 - 2000, 770 - 1180
400 - 700, 240 - 410
800 - 1400, 470 - 820
400 - 700, 240 - 410
800 - 1400, 470 - 820
Prod.
no.
MSA-125-3
MSA-160-3
MSA-200-3
MSA-125-4
MSA-160-4
MSA-200-4
MSAS-125-3
MSAS-160-3
MSAS-125-4
MSAS-160-4
MultiSmart
®
Arm
Delivery
The arm is delivered completely assembled. To
accomplish a variety of mounting solutions it can
be combined with stanchions PA-110 or PA-220.
* 5 m, 16' with MSA-XXX-3 and stanchion PA-220.
© Copyright:
All right reserved.All information within this printed matter may not be reproduced,
handed over,copied,xeroxed or translated into another language,in any form or any means without
written permission from PlymoVent AB. PlymoVent AB reserves the right to make design changes.
The PlymoVent "MultiSmart
®
Arm
"
extraction arm is a very flexible
and efficient extractor for dust, welding fumes, soldering fumes,
oilmist, fumes from solvents etc. The outer and inner tubes are
coupled by a gas spring balanced paralellogram arm for which we
have a patent application. The construction allows a stepless
positioning within the
operating range. The MultiSmart
®
Arm has an extremely
smooth movement. The MultiSmart
®
Arm reaches high above its
mounting height and is manoeuvrable through 190 - 230
°
depending
on length. Both inner and outer tubes are made of light, smooth
aluminium tubing. This not only makes the arm rugged but also
minimizes the total weight and noise level, even at high extraction
rates. As an option there is a shut-off damper on the outer tube
with a rubber sealing lip to minimize the noise level when the
damper is shut. The shut-of damper control knob has several
distinct positions which makes it possible to fine tune the airflow
through the arm.
A d v a n t a g e s
• CLEAR-THRU design- all components on the outside of the
tubes, resulting in less pressure drop.
• Supplied assembled - thus redusing installation time and
cost.
• Gas springs which balance the arm in any position - giving
very smooth movement caracteristics.
• Easy flexible hose removal - allowing easier cleaning or
hose replacement.
• Three different dimensions; Ø 125, Ø 160, Ø 200 mm
( 5"Ø, 6"Ø and 8"Ø ) and two lengths 3 and 4 m ( 10'
and 14') - for all needs.
• Safety encased paralellogram arm - eliminates possible
injury.
• Rubber sealed damper with accurate damper control
(accessory). Less noise when the damper is shut and stays
in position at any airflow.
MultiSmart
®
Arm
The MSA-XXX-3 can be changed to a MSA-XXX-4 by
adding a SAE-XXX-4 extension kit.
MultiSmart
®
Arm MSA-XXX-3 MultiSmart
®
Arm MSA-XXX-4
