0000117115/180618/A MistWizard
EN - 3
MistWizard/ENG/USA/CAN/3/11
C
H
G
B
I
E
H
D
F
A
mm
inches
A
542
21 11/32
B
642
25 13/32
C
428
16 27/32
D
390
15 13/32
E
597
23 17/32
f
442
17 13/32
G
165
6 1/2
h
159
6 1/4
i
10.5
13/32
J
572
22 1/5
K
1070
42 1/8
l
695
27 1/4
M
45
1 25/32
model: mW-2 with fua-1300
a
b
c
d
a
d
model: mW-2
NoTE! if the filter unit with fan or without shall be connected to external duct system on filtrated air side a flexible connection is needed
between the unit and duct system. MW-2: l= 600mm.
dimensional data
Design and function
Plymovent Mist Wizard filter is a highly effective mechanical filter for filtration of oil mist. The unique design
removes the oil mist in two stages. These are incorporated in order to maximize their effectiveness.
The collected liquids can be re-used or disposed.
filtration:
Polluted air (
a
) leads in the inlet, duct or hose and passes an air rotation separation stage (
b
) where separation of solid oil takes place by
centrifugal force. The main filter (
c
) separates the remaining oil particles from the air-stream (
d
).
Safety information:
1.
Before replacing the filter cartridge always switch off the power to the fan.
(see separate information: filter maintenance)
2.
Be careful when lifting and turning away fan from the filter unit.
3.
When replacing the filters, always use protective gloves and mask.
The collected oilmist may be dangerous to your health.
4.
The filter must never be opened during operation.
5.
All electrical maintenance must be carried out by an authorized electrician.
