0000117115/180618/A MistWizard
EN - 5
MistWizard/ENG/USA/CAN/5/11
© Copyright 2008: All rights reserved. All information within this printed matter may not be reproduced,
handed over, copied, xeroxed or translated into another language in any form or means without written
permission from Plymovent AB. Plymovent AB reserves the right to make design changes.
Date: 10-09-24
Product no:
MW-2
mist Wizard
1.
2.
440mm/17,32"
165mm/605"
1.
2.
MoUNTiNG iNSTrUCTioN
To enter the machine (1.) a Ø165 opening is needed. filter stand
MW-STA (2.) can be used (accessory).
Applicate brackets (1) to the filter unit by supplied hardwear (2), Note! M8x25 on
fan bracket side.
Direct mounting to machine:
Wall mounting of filter: MW-W
hole pattern for wall mounting.
note!
if the filter unit shall be connected to an external
duct system on filtrated air side a flexible connection is needed between
the unit and duct system to allow easy filter access.
MB-MW/S1
