0000100513/050719/C MDB GO | MDB PRO
2
PREFACE
Using this manual
This manual is intended to be used as a work of reference for
professional, well trained and authorised users to be able to
safely install, use, maintain and repair the product mentioned
on the cover of this document.
Pictograms and symbols
The following pictograms and symbols are used in this manual:
TIP
Suggestions and recommendations to simplify
carrying out tasks and actions.
ATTENTION
A remark with additional information for the user. A
remark brings possible problems to the user’s
attention.
CAUTION!
Procedures, if not carried out with the necessary
caution, could damage the product, the workshop or
the environment.
WARNING!
Procedures which, if not carried out with the
necessary caution, may damage the product or
cause serious personal injury.
CAUTION!
Risk of electric shok.
WARNING!
Fire hazard! Important warning to prevent fire.
WARNING!
Explosion hazard! Important warning to prevent
explosions.
Personal protective equipment (PPE)
Instruction to use respiratory protection when you
do service, maintenance and repair jobs, as well as
during functional testing. We recommend to use a
half-face respirator according to EN 149:2001 +
A1:2009, classe FFP3 (Directive 89/686/EEC).
Personal protective equipment (PPE)
Instruction to use protective gloves when you do
service, maintenance and repair jobs.
Text indicators
Listings indicated by “-” (hyphen) concern enumerations.
Listings indicated by “•” (bullet point) describe steps to
perform.
Service and technical support
For information about specific adjustments, maintenance or
repair jobs which are not dealt with in this manual, please
contact the supplier of the product. He will always be willing to
help you. Make sure you have the following specifications at
hand:
- product name
- serial number
You can find these data on the identification plate.
Product indications
- MultiDust Bank equals to: MDB
- The specific product type (4/6/8 etc.) corresponds with the
number of filter cartridges
- Suffixes:
- H: horizontal layout
- V: vertical layout
- no suffix: square layout
1
INTRODUCTION
1.1
Identification of the product
The identification plate contains, among other
things, the following data:
- product name
- serial number
- supply voltage and frequency
- power consumption
1.2
General description
The MDB is a central filter system that consists of modular
components. The position of the air inlet and air outlet
modules is variable. Dust collection in a dustbin underneath
each stack of filter modules.
Filter cartridges, extraction fan and control equipment are not
included and must be selected and ordered separately.
1.3
Product combinations
1.3.1 Filter cartridges
To operate the system, selection of filter cartridges is required.
The following types are available:
Filter:
type
surface
material
CART-D:
Premium Plus
15 m²
BiCo spunbond polyester
Premium
15 m²
spunbond polyester
Economy
15 m²
cellulose
CART-C
15 m²
BiCo spunbond polyester,
antistatic
CART-E
15 m²
BiCo spunbond pol PTFE
impregnation
CART-PTFE
10 m²
BiCo spunbond pol PTFE
membrane
15 m²
CART-MB
10,7 m²
cellulose with polypropylene
microfiber overlay,
electrostatically charged
The specific product type (MDB-4, MDB-12, etc.) corresponds
with the required number of filter cartridges.
Precoat
To enhance the efficiency and lifespan of the filter cartridges, it
is strongly recommended to add precoat material (PRECO-N).
This applies to all types of filter cartridges, except for CART-
PTFE and CART-MB.
Dosing per filter cartridge: 500 g (1.1 lbs.).
1.3.2 Extraction fan
The required capacity of the extraction fan depends on the size
of the MDB system, the required filter performance and the
permitted air flow through the filter cartridges.
Table I on page 16 gives an overview of the minimum and
maximum airflow per MDB type, as well as the minimum and
maximum motor power of the fan.
1.3.3 Control equipment
There are two ways to control the filter cleaning system of the
MDB and the connected fan.
