Plymovent CONTROLPRO, Руководство по установке

Страница: 5 / 23

0000112606/010720/A ControlPro 4
1.6.3 Control/SlaveBoard
The ambient conditions of the MDB or SCS filter system apply.
2 PRODUCT DESCRIPTION
2.1 Components
The product consists of the following main components and
elements:
2.1.1 ControlPro/Panel
Fig. 2.1
A Housing
B Control panel
C Main switch
D Power supply
E PC board (master board)
F Bottom plate with cable glands
Fig. 2.1
A B E D
C
F
Main components Panel
2.1.2 ControlPro/HMI
Fig. 2.2
A Touch screen
B Mounting bracket
Fig. 2.2
A
B
Main components HMI
2.1.3 Control/SlaveBoard
Fig. 2.3
A Box
B PC board (slave board)
Fig. 2.3
A B
Main components SlaveBoard
2.1.4 Connection cables
Set of cables to connect the Panel to the HMI and
SlaveBoard(s).
2.2 Operation
ControlPro is an intelligent platform that controls a filter
system MDB or SCS and the connected extraction fan. It
contains an extensive feature package to monitor and arrange
the RamAir™ pulse amplifier (filter cleaning system), the
required airflow and the corresponding fan speed. By means of
the user-friendly HMI you can program all desired parameters.
The HMI gives a clear insight into the system status and
performance at all times.
ControlPro allows for remote access via a network connection.
Fig. 1.1 and Fig. 1.2 show the connection of the components
of ControlPro with the filter system and extraction fan.
3 SAFETY INSTRUCTIONS
General
The ControlPro is delivered as part of a filter system
MDB or SCS of Plymovent. The safety instructions
written in the related manuals apply to the
ControlPro as well.
Intended use
7
The product has been designed exclusively as control
equipment for use with a filter system type MDB or SCS of
Plymovent with the connected extraction fan. Using the
product for other purposes is considered contrary to its
intended use. The manufacturer accepts no liability for any
damage or injury resulting from such use. The product has
been built in accordance with state-of-the-art standards and
recognised safety regulations. Only use this product when in
technically perfect condition in accordance with its intended
use and the instructions explained in the user manual.
4 INSTALLATION
4.1 Tools and requirements
You need the following tools to install the products:
- basic tools
- tools for electrical connections
8
4.1.1 To be sourced locally
Mounting material
9
:
- to install the Panel to the wall (hardware max.
Ø 10 mm)
- to install the HMI to the wall (head height of screws max. 6
mm, Ø max. 4 mm)
Connection cables
10
:
- refer to Table I on page 21 (#4 to 22) for the cable
specifications
If necessary:
- additional cable glands M16
7. “Intended use” as explained in EN-ISO 12100-1 is the use for which the
technical product is suited as specified by the manufacturer, inclusive of his
directions in the sales brochure. In case of doubt it is the use which can be
deduced from the construction, the model and the function of the technical
product which is considered normal use. Operating the machine within the
limits of its intended use also involves observing the instructions in the user
manual.
8. E.g. heat gun, cable stripping tool
9. The type of mounting material depends on the wall type
10. Number and type of cables depend on the selected options and control
equipment