PLX PEX 8648-AA, Справочник по аппаратуре

Страница: 11 / 64

PEX 8648-AA RDK Hardware Reference Manual, Version 1.2
Copyright © 2010 by PLX Technology, Inc. All rights reserved
6
Table 1. PEX 8648 RDK Base Board Port Configurations
Station 0
Port Configuration
Configuration
Module Installed
(P1)
SW2[2 – 1]
Setting
Connectors
Used
SW1[6]
Setting
Refer to
x4 UP
x4x4x4 DOWN
x4x4x4x4 LL (IP1), J1, J2, J3 H Figure 4
x16 UP x16 LH (IP1, IP2, IP3, IP4) H Figure 5
x8 UP
x8 DOWN
(Factory Default)
x8x8 HL (IP1, IP2), J2 H Figure 6
x8 UP
x4x4 DOWN
x8x4x4 HH (IP1, IP2), J2, J3 H Figure 7
x8 UP
x8 NT
x16 HL (IP1, IP2), IP3, IP4 L Figure 8
x4 UP
x4 NT
x4x4 DOWN
x8x4x4 LL (IP1), IP2, J2, J3 L Figure 9
Station 1
Port Configuration
Configuration
Module Installed
(P2)
SW2[4 – 3]
Setting
Connectors Used – Refer to
x4x4x4x4 DOWN x4x4x4x4 LL J4, J5, J6, J7 Figure 10
x16 DOWN x16 LH J4 Figure 11
x8x8 DOWN
(Factory Default)
x8x8 HL J4, J6 Figure 12
x8x4x4 DOWN x8x4x4 HH J4, J6, J7 Figure 13
Station 2
Port Configuration
Configuration
Module Installed
(P3)
SW2[6 – 5]
Setting
Connectors Used – –
x4x4x4x4 DOWN x4x4x4x4 LL J8, J9, J10, J11
x16 DOWN x16 LH J8
x8x8 DOWN x8x8 HL J8, J10
x8x4x4 DOWN
(Factory Default)
x8x4x4 HH J8, J10, J11
Note: In Table 1 , parenthesis around the IP components are used to indicate the connectors that comprise the
upstream Port.