PLX Technology PCI 9656RDK-LITE, Справочник по аппаратуре

Страница: 9 / 41

1. GENERAL INFORMATION
1.1 About the PCI 9656RDK-LITE
The PCI 9656RDK-LITE (RDK-LITE) is a flexible development platform for designs using the PCI 9656
with generic 32-bit Processor/Local Bus devices. The RDK-LITE is shipped pre-configured for de-
multiplexed generic address/data bus (C mode) operation, but is very easily reconfigured for multiplexed
address/data bus (J mode) applications. The RDK-LITE provides 30 surface-mount footprints and 2 BGA
footprints for hardware designers to easily add processors, DSPs, ASICs, FPGAs, memory, and I/O
devices to test, simulate, and debug their designs without fabricating their own boards. This can save a
considerable amount of time and money in the development process and shorten time to market.
The PCI
9656RDK-LITE's software, hardware registers and footprints are backward compatible with the PCI
9054RDK-LITE, simplifying the migration of existing 32-bit, 33 MHz PCI designs into 64-bit, 66 MHz PCI
products.
PLL
U1
LDO
U2
LDO
16-pin
SOIC
16-pin
SOIC
U10
LAH5 LAH6
osc
DB9
LAH4 LAH3
s1
BGA1
Landscape
1mm pitch
25x25
28-pin
SOIC
28-pin
SOIC
U11
JP1
RS232
Transceiver
Flash
ROM
socket
U13
CPLD
U14
32x32
SRAM
48-pin
SSOP 48-pin
SSOP
PLX
PCI 9656
LAH1 LAH2
POM
connector
44-pin
QFP
44-pin
QFP
160/112 PQFP
0.65mm
3.3V
GND
BGA2
Landscape
.05" pitch
26x26
84/68/44/28 pin
PLCC
5V
25x30
0.1"
through hole
prototype area
240/176/100 pin
0.5mm pitch QFP
Ethernet,USB
connector footprints
208/144/80 pin
0.5mm pitch QFP
54-pin
TSOP
54-pin
TSOP
28-pin PLCC on the
solder side
28-pin PLCC on the
solder side
128-pin 0.4mm pitch
TQFP on the solder side
208/144/80 pin 0.5mm pitch
QFP on the solder side
176/100 pin 0.5mm pitch
QFP on the solder side
Serial
EEPROM
Voltage Regulators
Figure 1-1. PCI 9656RDK-LITE Layout Diagram
PCI 9656RDK- LITE Hardware Reference Manual v1.4
© 2006 PLX Technology, Inc. All rights reserved.
1