ARKIWASH-PL018 User Manual Page 3
ARKIWASH-PL018
Warranty Registration
ARKIWASH-PL018
Installation
ARKIWASH-PL018
Safety Guidelines
The ARKIWASH-PL018 carries a 2 year limited warranty. Please fill out the enclosed warranty card to
validate your purchase. All returned service items whether under warranty or not, must be freight pre-
paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on
the out- side of the return package. A brief description of the problem as well as the R.A. number must
also be written down on a piece of paper included in the shipping carton. If the unit is under warranty,
you must provide a copy of your proof of purchase invoice. You may obtain a R.A. number by
contacting our customer support team on our customer support number. All packages returned to the
service department not displaying a R.A. number on the outside of the package will be returned to the
ship- per.
The unit should be mounted using a mounting clamp (not provided), affixing it to the mounting
bracket that is provided with the unit. Always ensure that the unit is firmly fixed to avoid vibration and
slipping while operating. Always ensure that the structure to which you are attaching the unit is
secure and is able to support a weight of 10 times the
unit’s weight. Also, always use a safety cable
that can hold 12 times the weight of the unit when installing the fixture.
The equipment must be installed by a professional, and it must be installed in a place where it is out
of the reach of people’s grasp.
Ensure ALL connections and end caps are properly sealed with a non-conductive dielectric
grease (available at most electrical suppliers) to prevent water ingress/condensation and/or
corrosion
⚫
Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to
remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of
electrical shock and fire in case of an internal short.
⚫
Disconnect from main power before making any type of connection.
⚫
Do not remove the cover under any conditions. There are no user serviceable parts inside.
⚫
Never operate this unit when
it’s cover is removed.
⚫
Never plug this unit in to a dimmer pack
⚫
Always be sure to mount this unit in an area that will allow proper ventilation. Allow about
6”
(15cm) between this device and a wall.
⚫
Do not attempt to operate this unit, if it becomes damaged.
⚫
During long periods of non-use, disconnect the
unit’s main power.
