•
Names of the parts
•
How to use the electric eraser
(1) Press the eraser lightly against the writing surface and move it
slowly so that it slides while pressing the power button of the
eraser body.
Power Button
LED
Pinpoint eraser
Strap Loophole
Battery cover
(1) Push your finger in the direction of
the arrow mark to slide the battery
cover off.
(2) Insert the AAA alkaline batteries as
shown in the figure.
* Insert the batteries with the
positive (+) and negative
(-)
poles in
the correct direction.
(3) Attach the battery cover after
inserting the batteries.
•
Preparations before use
Battery Installation/Replacement
(2) After you finished erasing, release the eraser from the writing
surface of the CleanBoard and release your finger from the
power button.
Keep the eraser in the eraser holder.
•
How to use the electric eraser
for pinpoint erasing
You can erase a narrow area such as a single character by
holding down the power button and sliding the tip of the pinpoint
eraser on the writing surface.
Printed in china 47-9911-20A
Sym
ptoms
• LED does not turn on
even when the power
switch is turned on
• Motor does not work
even when the power
switch is turned on
• Motor does not work
even though the
power switch is
turned on and the
LED is lit
Action
• Are the batteries depleted?
Replace with new batteries.
• Have the positive and negative
poles of the batteries been
reversed?
Insert the batteries correctly.
• Are there any magnets or metals
around the eraser?
Keep the eraser away from
magnets and metals.
•
Troubleshooting
•
Specifications
Battery Type: AAA alkaline battery x 2 pieces
Operating temperature : 5°C to 35°C
External dimensions ( including protrusions ) : W185 x D50 x H62 mm
Weight (including batteries) : About 258 g
• Please note that specifications are subject to change without notice for quality
improvement purposes.
Battery Type: AAA alkaline battery x 2 pieces
Batteries
are
included. Check operation.
