Re-imagine Beyond Technology
6.
MEDIA LAN 2110 CONTROL (out-band)
1)
Overview
Each SFP-25G-Series Plura monitor defaults to the Media LAN input source which is set to
display an internally generated 'blue screen' test signal from the 2110 module. The video format
defaults to 3840x2160p59.94.
2)
Management via Control LAN 2 UI
●
Open the Control LAN 2 UI Media LAN 2110 Control (out-band) page. Refer to section '
Connecting to the Control LAN 2 UI'.
●
The Media
LAN
2110 Control
has three tab options for out-band control: Main, Aux, and
Management. Figure 19
below shows the UI
Main Tab
and
Figure 20
shows the UI AUX
Tab.
●
In the Main tab there
are fields
to set the Video, Audio, and the Ancillary flows’
configuration.
Each flow allows configuration of both its
Primary and Secondary
fields
and has a
n
Enable check box.
Adjustable fields include the destination IP address, the
destinatio
n port, and video format (for primary video only, secondary video format
is
always the
same as the primary video format).
Figure 19. Main Tab
●
The Aux tab (Figure 20) allows
configuration of the auxiliary decapsulation channel
similar to the Main channel.
Operating Instructions
SFP-25G SERIES
18
