Re-imagine Beyond Technology
Figure 5.
Plura Monitor
Network Config2
Menu
●
On your computer, open your web browser and go to the IP address of the monitor (eg.
192.168.0.97
from Figure 5 above).
You should see a landing page
similar to that shown
in Figure
6
below.
Note: If the unit fails to establish a connection, add a port override to 8086 (suffix ':808
6/home' on the Control LAN 2 IP address in the browser address line). If this connects
properly, please contact Plura Support to get and install the latest web update.
From the Control LAN 2 UI landing page, the
“Monitor
Update”
button is used to update
Ember+
Control,
Ember+/TSL License,
Monitor FPGA (some
models), Monitor Firmware
(some models),
and the
Web UI itself. The
“Media LAN 2110 Control (out-band)” button
is used to
access out-band control of the 2110 module.
Figure 6. Plura Control LAN 2 UI
Operating Instructions
SFP-25G SERIES
11
