Plura MTD-ID, Руководство по эксплуатации

Страница: 9 / 18

Operating Manual MTD-ID
Electrostatic Discharge (ESD) Precautions
All semiconductor devices are sensitive to ESD. To prevent any damage or
degradation on components of the product caused by ESD, observe these
precautions when directed to do so (installing, removing sensitive
components):
Use a Ground Strap. Wear a grounded anti-static wrist or heel strap to discharge the static
voltage from your body.
1. Use a Safe Work Area. Avoid handling components in areas that have a floor or work
surface covering capable of generating a static charge. Nothing capable of generating or
holding a static charge should be allowed in the work area.
2. Handle ESD sensitive components carefully. Do not slide components over any surface.
Do not touch exposed connector pins. Pick-up components by the body, never by the
leads.
3. Transport and store sensitive components or assemblies in a static-protected bag or
container.
A6 Certifications & Compliances
CE-Declaration:
We,
Plura Europe GmbH
Binger Weg 12
D- 55437 Ockenheim
herewith declare under our sole responsibility that the
MTD-ID
meets the intent of the following directives, standards and specifications:
89/336/EEC Electromagnetic Compatibility
EN 50081-1 Emissions
•
EN 55022
•
EN 55103-1
EN 50082-1 Immunity
•
EN 55024
•
EN 55103-2